Hexamoll DINCH
BASF Hexamoll DINCH is a safe plasticizer for PVC and other polar polymers.
CAS-No.:166412-78-8
Manufacturer: BASF
Place of origin: USA
Product Introduction
1. General Introduction
BASF Hexamoll DINCH is a safe plasticizer for PVC and other polar polymers, ,compatible with all of the monomeric plasticizers commonly used in PVC. In most cases, only minor formulation and processing parameter adjustments are required to process flexible PVC compounds. Versatile non-phthalate plasticizer specially intended for use in applications that involve human contact.
Hexamoll DINCH is a clear, colorless plasticizer that was developed for use in applications that are particularly sensitive based on exposure and toxicological issues. It is recommended for use in medical products, toys, and food packaging applications. Compared to DOP and DINP, Hexamoll DINCH offers improved low temperature performance. In plastisol applications it offers lower initial viscosity and better viscosity stability.
2. Technical Datasheet
SPECIFICATION | VALUE |
Specific gravity @ 25°/25 °C | 0.942 - 0.952 |
Ester content, % by area (minimum) | 99.5 |
Acid Number, mg KOH/g (maximum) | 0.07 |
Water, % by weight (maximum) | 0.1 |
Color, Pt-Co Units (APHA, maximum) | 40 |
Suspended Matter | COLSFFM |
Phthalate content (% maximum) | 0.01 |
As, Ba, Cr, Hg, Pb, Sb, Se, Sn (ppm max.) | 1 each |
Cd (ppm max.) | 0.6 |
Hot Tags: hexamoll dinch, China hexamoll dinch manufacturers, suppliers, factory, Eastman Plasticizer, Plasticizer, Eastman TXIB, Hexamoll DINCH, BASF Hexamoll, BASF Plasticizer
You Might Also Like
Send Inquiry
